Adhesion Measurement of Films and Coatings

Contents:

Adhesion measurement of films and coatings: A commentary
K.L. Mittal

Adherence failure and measurement: Some troubling questions
S.D. Brown

Measurement of adhesion for thermally sprayed materials
C.C. Berndt and C.K. Lin

Adhesion measurement of thin metal films by scratch, peel, and pullmethods
A. Kinbara and I. Kondo

Fracture mechanics tests for measuring the adhesionof magnetron-sputtered TiN coatings
D. Müller, Y.R. Cho, S. Berg and E. Fromm

The effect of residual stresses on adhesion measurements
M.D. Thouless and H.M. Jensen

Adhesion of diamond-like carbon films on polymers: an assessmentof the validity of the scratch test technique applied to flexiblesubstrates
B. Ollivier and A. Matthews

Adhesion improvement of RF-sputtered alumina coatings asdetermined by the scratch test
F. Ramos and M.T. Vieira

Scratch indentation, a simple adhesion test method for thin filmson polymeric supports
G.D. Vaughn, B.G. Frushour and W.C. Dale

On the evaluation of adhesion of coatings by automatic scratchtesting
T.Z. Kattamis

Continuous microscratch measurements of thin film adhesionstrengths
S.K. Venkataraman, J.C. Nelson, A.J. Hsieh, D.L. Kohlstedt and W.W. Gerberich

Micro-scratch test for adhesion evaluation of thin films
V.K. Sarin

Mechanics of the indentation test and its use to assess the adhesionof polymeric coatings
R. Jayachandran, M.C. Boyce and A.S. Argon

Observations and simple fracture mechanics analysis ofindentation fracture delamination of TiN films on silicon
E.R. Weppelmann, X.-Z. Hu and M.V. Swain

A study of the fracture efficiency parameter of blister tests forfilms and coatings
Y.-H. Lai and D.A. Dillard

Adhesion (fracture energy) of electropolymerized poly(n-octylmaleimide-co-styrene) coatings on copper substrates using a constrainedblister test
J.-L. Liang, J.P. Bell and A. Mehta

An experimental partitioning of the mechanical energy expendedduring peel testing
R.J. Farris and J.L. Goldfarb

Comparison of finite element stress analysis results with peelstrength at the copper-polyimide interface
R.H. Lacombe, L.P. Buchwalter and K. Holloway

Measurement of the practical adhesion of paint coatings tometallic sheets by the pull-off and three-point flexure tests
A.A. Roche, P. Dole and M. Bouzziri

Analysis of pull tests for determining the effects of ionimplantation on the adhesion of iron films to sapphire substrates
J.E. Pawel and C.J. McHargue

Measurement of the adhesion of diamond films on tungsten andcorrelations with processing parameters
M. Alam, D.E. Peebles and J.A. Ohlhausen

Adhesion measurements of non-crystalline diamond films preparedby a laser plasma discharge source
F. Davanloo, T.J. Lee, H. Park, J.H. You and C.B. Collins

Nondestructive dynamic evaluation of thin NiTi film adhesion
Q. Su, S.Z. Hua and M. Wuttig

Recent developments in the laser spallation technique to measure theinterface strength and its relationship to interface toughness withapplications to metal/ ceramic, ceramic/ ceramic and ceramic/ polymerinterfaces
V. Gupta, J. Yuan and A. Pronin

Assessment of adhesion Ti(Y)N and Ti(La)N coatings by an insitu SEM constant-rate tensile test
Z. Yu, C. Liu, L. Yu and Z. Jin

Adhesion studies of polyimide films using a surface acoustic wavesensor
D.W. Galipeau, J.F. Vetelino and C. Feger

Salt bath test for assessing the adhesion of silver topoly(ethylene terephthalate) web
J.M. Grace, V. Botticelli, D.R. Freeman, W. Kosel and R.G. Spahn

Testing the adhesion of paint films to metals by swelling inN-methyl pyrrolidone
W.J. van Ooij, R.A. Edwards, A. Sabata and J. Zappia

1995; x+456 pages
ISBN 90-6764-182-0
Price (all prices are subject to change without notice): EUR 116/US$ 166